Isle of Wight County |
Code of Ordinances |
Appendix B. ZONING.* |
Article IV. Zoning Districts and Boundaries. |
Part 12. General Industrial (GI) District. |
§ 4-12005. Bulk regulations.
A.
Maximum height of structure:
1.
All structures: Seventy-five (75) feet.
a.
The side and rear yard setbacks for any structure in excess of thirty-five (35) feet in height shall be increased one (1) foot for each additional foot of structure height over thirty-five (35) feet.
b.
Where structures exceed the thirty-five-foot height requirement a building separation of thirty (30) feet shall be required.
c.
See subsection 5-2000.D, for exceptions to height limits.
B.
Maximum density:
1.
Floor area ratio for nonresidential: One-sixth (0.60) square foot per foot of net developable area.
C.
Minimum setback requirements:
1.
Front yard: Thirty-five (35) feet.
a.
Industrial uses shall meet a setback of one hundred (100) feet, except that office buildings associated with the industrial use may meet the minimum setback of thirty-five (35) feet.
b.
For lots within designated industrial park of twenty (20) acres or more, office buildings associated with the industrial use shall meet a setback of thirty-five (35) feet.
2.
Side yard: Twenty (20) feet.
3.
Rear yard: Twenty (20) feet.
D.
Maximum lot coverage: .....Sixty percent (60%).
E.
Minimum open space ratio (OSR): .....Twenty-five percent (25%). (11-17-16; 7-19-18; 11-15-18.)